FRN Lift 400 Series Biến tần FUJI dòng Frenic Lift 400VAC Series

Inverter FRENIC LIFT Series Specifications: 400VAC (4->45kW)
Fuji Electric Europe introduces the new frequency inverter for lifts, Frenic Lift.

Over the years Fuji Electric has collected a know-how of inverters for lift applications, this know-how has resulted in a new inverter developed especially for lift applications and the high standards this require.
Fuji Electric has with Frenic Lift already a large market share of the lift industry in Spain and this has helped to develop and improve the inverter, which is now available for the entire European lift market.
The inverter offers many possibilities and as all Fuji Electric products a very high quality. Frenic Lift is one of the best inverters currently on the market for lift applications.

Frenic Lift offer:
 - Speed control accuracy: + 0.01%
 - Rise time: 300 µs
 - 200% of rated current for 10 s
 - Product range:
   4.0kW to 45kW (3 ph 400V supply)
   5.5kW to 22kW (3 ph 200V supply)
   2.2kW (1 ph 200V supply)

*1 A box (􀂆) in the above table replaces C, E, A or J depending on the shipping destination.
A box (􀂄) in the above table replaces A for the inverter without a CAN port
*2 Fuji 4-pole standard motor
*3 Rated capacity is calculated by assuming the output rated voltage as 220 V.
*4 Output voltage cannot exceed the power supply voltage.
*5 Assuming the carrier frequency: 10 kHz, ambient temperature: less than 40°C, RMS output current of the inverter:
80% of the rated output current.
*6 Calculated under conditions specified by Fuji Electric, which are the power source capacity: 500 kVA, input
impedance: 5%, power supply voltage: 200 VAC, and power source frequency: 50 Hz.
*7 Obtained when a DC reactor is used.
*8 Voltage unbalance (%) = (Max. voltage (V) − Min. voltage (V)) × 67 (IEC61800-3 (5, 2, 3)) / Three - phase average voltage (V)
*9 Permissible error range of the minimum resistance is +5 to -5%.