|
General Specifications |
|
|
Model |
V806 |
|
|
|
Power supply |
Rated voltage |
DC24V |
|
Permissible range of voltage |
DC24V±10% |
|
Permissible momentarypower failure |
Within 1ms |
Demand
(maximum rating) |
15W or less |
|
Inrush current |
17A,2ms(DC24V) |
|
Insulation resistance |
|
DC500V 10MΩ or more |
|
Physical environment |
Ambient temperature |
0℃ ~ +50℃ |
|
Storage temperature |
-10℃ ~ +60℃ |
|
Ambient humidity |
85%RH or less(without dew condensation, Max. wet bulb temperature: 39℃ or lower) *1 |
|
Resistance to solvent |
No attachment of cutting oil or organic solvent |
|
Atmosphere |
Not exposed to corrosive gas or conductive dust |
|
Operation altitude |
2,000 meter or lower |
|
Contamination level |
Level 2 |
|
Mechanical operatingconditions |
Resistance to oscillation |
Vibration frequency: 10~150Hz, acceleration: 9.8m/s2(1.0G) pulsating width: 0.075mm, X,Y,Z: 3 directions 1 hour each way |
|
Resistance to shock |
Pulse shape: half-sine, peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, six times each way |
|
Electric operating conditions |
Noise proof |
1500Vp-p (pulse width 1μs, pulse rise time : 1ns) |
|
Static discharge |
Complies with IEC61000-4-2, contact: 6kV, air: 8kV |
Installation
conditions |
Grounding |
Grounding resistance : Less than 100Ω , FG/SG separation |
|
Structure |
Protect structure: Front panel: Compatible with IP65 (when water-proof gasket is used.)
Rear cover: Compatible with IP20 Form: Single unit Installation method: Panel mounting |
|
Cooling system |
Natural air cooling |
|
Weight |
Approx.740g |
|
Dimensions W×H×D(mm) |
128.5x138.8x50.8 |
|
Panel cutout (mm) |
147x131(+0.5/-0) |
|
Case color |
|
Gray |
|
Material |
|
PC/ABS |
|
Performance Specifications |
|
|
Model |
V806iT |
V806T |
V806iC |
V806C |
V806iM |
V806M |
|
Display specifications |
Screen memory |
4.5MB |
|
Display device |
TFT color LCD |
STN color LCD |
STN monochrome LCD |
|
Resolution W:H(dots) |
320x240 |
|
Display size |
5.7 inches |
|
Colors |
65,536 colors (without blinks) / 32,768 colors (with blinks) |
16grayscale |
|
Backlight |
CCFL |
|
Backlight life *5 |
About 50,000 hours |
About 75,000 hours |
About 58,000 hours |
|
Backlight Auto OFF |
Lit in normal (Set by the user) |
|
Power lamp |
Lit in normal condition, blinks in alarm condition such as blowout of backlight bulbs |
|
Contrast adjustment |
Fixed |
|
Brilliance control |
3 levels (Adjusted into 128 grades by macro command) |
Fixed |
|
Number of characters |
1/2-byte |
40columns × 30 lines |
|
1-byte |
40columns × 15 lines |
|
2-byte |
20columns × 15 lines |
|
Enlargement of characters |
|
X: 1 ~ 8 times Y: 1 ~ 8 times |
|
Touch switch |
Switch resolution |
Analog: 1,024×1,024 |
|
Mechanical life |
1 million times or more |
|
Surface treatment |
Hard coating, Non glare finish 5% |
|
Function switch |
Number of function switches |
6 switches |
External
interface |
D-Sub 9-pin (CN1) |
RS-232C, RS-422/485, Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none,Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200,187500*6 bps |
Modular 8-pin
(MJ1/ MJ2) |
RS-232C, RS-422/485 (two-wire system), Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none,Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps |
|
CF card interface |
Optional unit DU-10 |
|
Ethernet *4 |
Complies with IEEE802.3, Baud rate: 100Mbps, 10Mbps Cable: 100Ω Unsealed twist pair, Category 5, Max length: 100m |
|
USB |
Type A, Type B (Ver1.1) |
|
Clock & Back up memory |
Battery |
Coin-type lithium primary battery |
|
Back up memory (SRAM) |
512KB |
128KB |
512KB |
128KB |
512KB |
128KB |
|
Back up period |
5 years (Ambient temperature 25℃ ) |
|
Calendar accuracy |
Gap±90 sec. per month (Ambient temperature 25℃ ) |